CutUnix
The comprehensive system of MDF workers
Support: 02191302815
Support: 02191302815
If you have calculated the cutting dimensions of your project and need a cutting plan and the number of sheets used; This program is for you. Take a photo of the cut dimensions and get the cut plan.
- First step
For better conclusions, it is necessary to record the cutting dimensions in the app sample forms. For this, download and print the sample forms. Then write down the desired dimensions on the form in a well-written and legible manner. Do not forget to enter the number of each piece. To record the tape, use the Persian letter “N”, the letter “F” and the groove, use “S”.
Use this button to download the order form.
-Second step
By pressing the button to take a picture of the dimensions, the project registration page will open. Choose a name for your project and enter the sheet specifications. It is also necessary to specify the specifications of the tape used in this project. Finally, press the save button.
- Third step
After registering the desired project and sheet, the phone camera will be activated. Carefully take a photo of your dimension form and upload it. Give the robot time to analyze the dimensions. After displaying the dimensions, check it carefully and edit it if needed.
If you are not satisfied with the final result, use this button. The previous information is deleted and you can register a new photo.
If more than one sheet type is used for this project, use the Add New Sheet button to register them.
If your dimensions are recorded on more than one form, press the button to scan the new form and repeat the previous steps.
- fourth step
After entering the cutting dimensions and completing the analysis, we will enter the project analysis screen. On this page, you can add a new order form for the registered sheet or edit the registered dimensions.
By pressing the additional sheet button, you can record the cutting dimensions of another sheet. First, enter the specifications of the sheet, press the save button and take a picture of the cutting dimensions.
By pressing this button, the information is saved . After this, you can access this project from the analysis list page and complete it.
Use this button to get the cutting map.
-Fifth step
At this stage, allow the software to perform the required processing and receive the output. You can get the cutting map and download the opticut file.
By pressing the analysis list button on the main page of the application, you can see all the registered projects. By clicking on each one, you will access the details of the project.
When using the CutunixShot application, keep these things in mind:
If you do not receive an SMS when you log in and register to the application, make sure that the VPN is turned off on your device.
To make the software work more accurately, print the sample file and write your measurements on it. Or request to send a printed form through support.
Due to the high costs of programming, artificial intelligence servers and data to continue the service, the app is currently offered at a cost.
To contact the application support department, call the following number:
02191302815 – 09388038799